DIGITAL OIL METER

Features

• Complete range of products offering the best solutions for the measurement of oil consumption
• State-of-the-art design with electronic counter, flow indication digital output signals and limiting value switch
• Mounting on the pressure or suction side of a pump, with no straight inlets or outlets required
• High vibration resistance
• Classical version with ELECTRONIC display
• 

Your benefits

• Reliable monitoring and flexible control of the system. Simplifies burner settings and optimising consumption
• Highly flexible mounting with very small space requirements
• Accurate measurements
• Maximum safety in the shipbuilding and automobile industries
• Cost-effective metering point
• inferential single jet, super dry, straight reading type, hermetically sealed meter with magnetic drive totaliser.
• Brass/steel body and Coupling
• Sealed against tampering
• Leak proof totally dry
• Maximum Reading 99999 K/Litres 99999 K/Litres
• Accuracy + 5% at 30 Ltr/hr. 50 Ltr/hr   + 2% at 120 Ltr/hr. 200 Ltr/hr   + 2% at 1500 Ltr/hr. 2500 Ltr/hr   + 2% at 3000 Ltr/hr. 5000 Ltr/hr
• Tempreture Suitability Upto -5°C to 60°C
• Maximum Test Pressure 25 Kg/Cm2 25 Kg/Cm2
• Working Pressure 16 Kg/Cm2 16 Kg/Cm2

• Length of meter with coupling 250 mm + 5 mm
• 290mm + 5mm Length of Meter without Coupling 110 mm 165 mm Width 80 mm 80 mm Height 80 mm 80 mm Meter Thread 3/4" BSP 1" BSP Coupling thread 1/2" BSP 3/4" BSP
  SIZE OF THE METER 15 MM,20 MM,25 MM,40 MM,50 MM
• Maximum Recording Capacity in Kilo Litres 9999
• Minimum reading Quantity in Litres 1
• Overall length including Nipple + 5mm 470
• Overall height in mm 170
• Overall width in mm 135
• Hydrostatic Test 2.0 MPa
• Maximum Flow Rate in Qmax - Lts./Hr.5000
• Nominal Flow Rate Qn-Lts/Hr.1500
• Metering Accuracy +2%
• Permissible loading litres per day (8 hr.) 24,000 , 40,000

  

• Chemical pumps in chemical industries use this oil meter and flow measuring device to flow the oil effectively.

• In hydraulic oil systems, this oil flow meter measures the velocity, temperature, pressure and also the flow. In the automobile industry, crude oil processing plants and in circulating oil lubrication systems heavy use of this measuring equipment is done to measure the flow of oil. Some hot oil flow meter can also provide visual indication of flow rate.

  Its compact size works well in restricted-space locations and rugged construction provides years of service. This fuel oil flow meter can also be used in hot oil applications and is economic for use in many locations throughout the plant.

• we recomment-

1. The size of the SUPREME Oil Meters for an application should be based on maximum oil flow rate in the pipeline, the pipeline size and pressure available at meter point.
2. For unloading of oils under gravity head we recommend our standard oil meters.
3. For unloading petroleum products by pump, install a,25 mm,50mm/ 80mm oil meter.
4. For recording draw offs from storage tanks use 40mm, 50mm or 80mm size meter based on the maximum oil flow rate in the line.
5. For monitoring oil consumption, use 15mm, 20mm or 25 mm size SUPREME oil meters based on maximum oil flow rate and the head available.
6. If flowrate is small and the pipeline size is big then reducers should be used.

Installation

SUPREME Oil Meters are supplied either with screwed ends or flanged ends. For 15mm, 20mm and 25mm size SUPREME oil Meters, screwed as well as flanged ends are available. The 25mm,40mm, 50mm and 80mm size meters are flanged only.

1. To remove particulate contamination from oil stream a strainer of not less than 100 mesh should be fitted up stream of the meter. Before the meter and filter are fitted, pipelines must be flushed thoroughly. To simplify subsequent servicing it is recommended that each meter and its associated filter are installed with a bypass.
2. Use of air release system is also essential while unloading petroleum products through a pump. This ensures removal of air from the oil stream which may otherwise cause metering error.

Typical Applications

Measuring Oil Receipts

Petroleum products like diesel, furnace oil, LDO and LSHS are received in bulk by tank lorries or through railway wagons. The present system of recording the quantity of oil receipt is either by dip-stick measurement or by weighment of tank lorries. Both these methods suffer with inadequate information and unsrupulous pilferage of costly fuels is quite common.

Now, one can install SUPREME Oil Meter at the receiving point whenever oil is received, exact quntity can be recorded through the meter.




Monitoring Oil Consumption

With the continuously rising prices of oil, management of oil consumption is more important then ever. SUPREME Oil Meters help to monitor oil consumption in oil consuming equipment like diesel generators, boilers, furnaces, thermopack etc. Monitoring of oil consumption in individual equipment on daily basis helps to reduce consumption by taking corrective maintenance action at the earliest.

Recording Draw - Off From Storage Tanks
SUPREME Oil Meters can be installed in the lines supplying oil from main storage tanks to consumption points. They help to record and maintain inventory of costly petroleum products. SUPREME Oil Meter functions effectively even under gravity head.

Features
Positive Displacement Type Among the many flow meter designs available today, it holds the top place both in performance and in field proven appraisement, is must for high viscosity fluids.

Finest Accuracy & Reliability

Exceptional accuracy and reliability are the result of state-of-the-art machining techniques; advanced quality control programs; and the most advanced testing and proving facilities. Typical accuracy is better than +(-) 0.5% of reading indicated. Meters accurate to better than +(-) 0.2% can also be furnished on request.
Low Pressure Drop

Even with high viscosity products, the pressure drop across the meter is very low. The meter can operate even under 1" head of oil. It is successfully utilised to receive oils; especially diesel, petrol, LDO etc. even while unloading under gravity head without extra source of pumping.
Reliable Electronics

As an optional equipment pulse generators are also available for converting the output into a pulse signal for remote instrumentation and control. Electronic instruments for remote totalization, flow rate indication, batch controlling and computer interface are readily available.
Simple Construction & Easy Maintenance
In contrast to the many designs including traditional ones, the SUPREME oil meters operate on a principle which cannot be simplified any more. the volumetric rotary piston design means that the accuracy is maintained irrespective of the plain in which meter is mounted.

• Parts in contact with the liquid are exceptionally small in number, which means only small pockets are present in the measuring chamber.
• By employing a powerful magnetic coup[ling between the measuring chamber and the register, only one moving part is exposed to the metered fluid. ease of maintenance and long life are the results.

SUPREME oil meters are also supplied with electronic counter & battery back up.

wireless automation, wireless temperature controller, wireless monitoring and data logging,level controller-water-oil,level measurement and control_liquid_soild, run time compensator, current limiting device, timer,temperature controller, automatic changeover, phase sequence corrector,street light timer,design, drawing, energy saver, plotting,digital oil llevel & metering,